Abstract: Polyurethane-steel sandwich structure, which creatively uses the polyurethane-steel sandwich composite as a structural material, is proposed to strengthen the impact resistance of buildings under debris flow. The impact resistance of polyurethane-steel sandwich structure under debris flow is investigated by a series of impact loading tests, compared with that of traditional steel fram...

from the time that civil engineers have used steel in building structures, they tried to increase its strength so as to produce more economic and lighter structures by using more elegant sections. increase of steel strength is not always useful for all members of a steel structure. in some members under certain conditions, it is needed to reduce the strength as much as possible to improve the b...

It has been clarified that deformation and annealing of martensite starting structure can produce ultrafine-grained structure in low carbon steel.  This study aims to investigate the texture evolution and mechanical properties of samples with martensite structure deformed by two different forging processes. The martensitic steel samples were forged by plane strain compression and multi-directio...

The microstructure of steel is decisive for its chemical, physical and mechanical properties. Depending on the parameters characterising liquid metal as well as the parameters of the steel casting influencing the crystallisation process, the macrostructure of casts and ingots consist of three, two or only one crystallisation zone. In steel ingots, its most frequent by consist of three zones: ch...

the effects of steel wire patenting process parameters on very fine interlamellar spacing in the pearlitic steel wire were investigated and the optimized condition of the process was achieved. in this work, the initial nanopearlitic structure was obtained in a 0.72 wt% carbon steel wire before the wire drawing process. the results were the minimum interlamellar spacing of 35 nm and maximum ulti...

A 0.4C-2Si-1Cr-1Mo steel with an ultrafine elongated grain (UFEG) structure and an ultrafine equiaxed grain (UFG) structure was fabricated by multipass caliber rolling at 773 K and subsequent annealing at 973 K. A static three-point bending test was conducted at ambient temperature and at 77 K. The strength-toughness balance of the developed steels was markedly better than that of conventionall...

Manufacturing execution system (MES) is a bridge that connects the top layer of planning and the bottom layer of control. In integrated automation system (IAS) whose structure is 3-layer BPS/MES/PCS, MES is the key circle to realize the integrating of integrated automation system in iron & steel enterprise. According to the characteristics of production management in iron & steel enterprise, th...